Issues with .DWG from 123D Design
Thiago
04 Jul 2016
Hello,
I´m having issues with a .dwg that was exported from 123D Design, from a 3D model.
I can´t snap to edges and measure distances (distance command). It is strange.
The file I´m using is attached.
Hope someone can help.
Regards,
Thiago
I´m having issues with a .dwg that was exported from 123D Design, from a 3D model.
I can´t snap to edges and measure distances (distance command). It is strange.
The file I´m using is attached.
Hope someone can help.
Regards,
Thiago
Attached Files
-
tampa superior.dwg (109.52K)
downloads: 28
Hellen_V
06 Jul 2016
Hi,
nanoCAD 5 works with 2D-drawings.
You can try nanoCAD Pro 7, it can snap to 3D-objects.
nanoCAD 5 works with 2D-drawings.
You can try nanoCAD Pro 7, it can snap to 3D-objects.
Thiago
07 Aug 2016
Hi Hellen,
Thanks for the reply.
I understand, and I found out that this is an issue with 123D Design and the way it exports 2D drawings in DXF/DWG format.
The holes for example, in 2D, are exported as a series of segments, so they are not recognized as circles... and I can´t measure it. Is it possible to somehow convert the segments into a full circle?
Regards,
Thanks for the reply.
I understand, and I found out that this is an issue with 123D Design and the way it exports 2D drawings in DXF/DWG format.
The holes for example, in 2D, are exported as a series of segments, so they are not recognized as circles... and I can´t measure it. Is it possible to somehow convert the segments into a full circle?
Regards,
Attached Thumbnails
Gareth
08 Aug 2016
Yep load the drawing, select Modify, Explode. Now you can select intersections, Snap, Measure etc.
Probably need to redraw all the circles.
Probably need to redraw all the circles.
