Measurement / Symbol Scales
David_Parker
26 Jun 2022
After some confusion I understand the concept now but it would seem I am limited to the scales set within the menu?
Problem with this is I am trying to use 1:25 to fit my drawings onto one sheet but for dimensioning it is causing me limitations.
Seems I can work around this by dimensioning in VP model space and proceeding to using chspace command.
Is there no way to edit the measurement and symbol scale list like there is for the drawing scales list?
Problem with this is I am trying to use 1:25 to fit my drawings onto one sheet but for dimensioning it is causing me limitations.
Seems I can work around this by dimensioning in VP model space and proceeding to using chspace command.
Is there no way to edit the measurement and symbol scale list like there is for the drawing scales list?
Artemio
27 Jun 2022
Hello.
Call command: PARAMS
In appeared window open: "Main options" -> "Design"
There you can input in "Drawing scale" (which is "Symbol scale actually) or in "Model scale" (which is "Measurement scale) required value "1:25". You can input is as it is.
Call command: PARAMS
In appeared window open: "Main options" -> "Design"
There you can input in "Drawing scale" (which is "Symbol scale actually) or in "Model scale" (which is "Measurement scale) required value "1:25". You can input is as it is.
David_Parker
29 Jun 2022
That did the trick as well thank you. Much easier than my work around!
David_Parker
29 Jun 2022
David_Parker, on 29 June 2022 - 12:55 AM, said:
That did the trick as well thank you. Much easier than my work around!
But would be even better to be able to edit the measurement and symbol scale list directly from the tab at the bottom of the window.
