Blocks Grow when Created 2nd attempt for help

Like This

Unlike

Ronald Corbin 25 Nov 2020

I am trying to create blocks of furniture to move around in a drawing to check fit and various layouts.

When I create the blocks they grow in size. To massive size. I have attached a file where I drew a box 2 feet by 1 foot.

I copied the box and then created a Block from the copy.

As you can see in the attached file, the block ended up massively larger than the original.

Why and what can I do to keep the blocks the original size?

Quote

Like This

Unlike

pguimber 26 Nov 2020

hello,
the file ...? where is ?

Quote

Like This

Unlike

Ronald Corbin 28 Dec 2020

This is the 3rd time I have uploaded this file. Yet apparently no one can see it. Hope it works this time.

Quote

Like This

Unlike

Ronald Corbin 28 Dec 2020

OK apparently I have a different problem. I attach a file to a comment but it does not show up in my comment.
How do I fix that?

Quote

Like This

Unlike

Ronald Corbin 28 Dec 2020

Attempt 4 at attaching the file

Attached Files

Block test.dwg (22.61K)
downloads: 5

Quote

Like This

Unlike

pguimber 29 Dec 2020

Hello,
Thank's for the file.
This is a x24.5 scale ratio of the block.

Your block is defined in inches so by inserting it the proposed scale factor is x25.4.
Set your drawing parameter to the "nothing" unit ... Use the 'Insunits' variable for this and set it to 0 (it's 4 in your drawing).

By inserting your block it will keep the initial size.
Cordially Patrick

Quote

Like This

Unlike

Ronald Corbin 31 Dec 2020

Or just change the drawing unis to Inches. (thanks to pguimber for sending me on the right direction to find this.)
Which apparently I have to do every time I do something with this drawing.
Is there any way to Avoid having to constantly change the drawing units to inches?
Everything I work in is in inches and I have hundreds of existing blocks, all in inches.

Quote

Like This

Unlike

pguimber 02 Jan 2021

Hello
in autocad you can (options) put two other variables on the desired unit (insunitsdefsource - insunitsdeftarget).

NC variables are listed with Setvar Have equivalent variables exist.
Or edit Insunits in a template file ...

cordially Patrick

Spoiler

Enter variable name or ?: ?
3DDWFPREC <2.0000>
ACADVER <> (Read Only)
ACISPROXYMODE <1>
ACISSAVEASMODE <0>
ANGBASE <0>
ANGDIR <0>
ANNOALLVISIBLE <1>
ANNOTATIVEDWG <0>
APBOX <0>
APERTURE <10>
ATTDIA <0>
ATTMODE <1>
ATTREQ <1>
AUNITS <0>
AUPREC <0>
AUTOSNAP <63>
BACKZ <0.0000> (Read Only)
BINDTYPE <0>
BLIPMODE <0>
CAMERADISPLAY <0>
CAMERAHEIGHT <0.0000>
CANNOSCALE <1:1>
CDATE <20210102.0834> (Read Only)
CECOLOR <BYLAYER>
CELTSCALE <1.0000>
CELTYPE <ByLayer>
CELWEIGHT <-1>
CETRANSPARENCY <ByLayer>
CHAMFERA <0.0000>
CHAMFERB <0.0000>
CHAMFERC <0.0000>
CHAMFERD <0>
CLAYER <0>
CMATERIAL <ByLayer>
CMDACTIVE <0> (Read Only)
CMDDIA <1>
CMDECHO <1>
CMDNAMES <>
CMLEADERSTYLE <Standard>
CMLJUST <0>
CMLSCALE <20.0000>
CMLSTYLE <STANDARD>
COORDS <1>
CPLOTSTYLE <ByColor>
CSHADOW <0>
CTAB <Model>
CTABLESTYLE <Standard>
CURSORSIZE <5>
CVIEWDETAILSTYLE <Metric50>
CVIEWSECTIONSTYLE <Metric50>
CVPORT <2>
DATE <2459217.3569> (Read Only)
DBCSTATE <0>
DBMOD <1> (Read Only)
DELOBJ <1>
DGNFRAME <0>
DGNIMPORTMAX <0.0000>
DGNOSNAP <1>
DIMADEC <0>
DIMALT <0>
DIMALTD <2>
DIMALTF <25.4000>
DIMALTMZF <100.0000>
DIMALTMZS <>
DIMALTRND <0.0000>
DIMALTTD <2>
DIMALTTZ <0>
DIMALTU <2>
DIMALTZ <0>
DIMAPOST <>
DIMARCSYM <0>
DIMASO <1>
DIMASSOC <2>
DIMASZ <2.5000>
DIMATFIT <3>
DIMAUNIT <0>
DIMAZIN <0>
DIMBLK <>
DIMBLK1 <>
DIMBLK2 <>
DIMCEN <2.5000>
DIMCLRD <BYBLOCK>
DIMCLRE <BYBLOCK>
DIMCLRT <BYBLOCK>
DIMDEC <4>
DIMDLE <0.0000>
DIMDLI <6.0000>
DIMDSEP <.>
DIMEXE <0.0000>
DIMEXO <0.5000>
DIMFRAC <0>
DIMFXL <1.0000>
DIMFXLON <0>
DIMGAP <1.0000>
DIMJOGANG <45>
DIMJUST <0>
DIMLDRBLK <>
DIMLFAC <1.0000>
DIMLIM <0>
DIMLTEX1 <ByLayer>
DIMLTEX2 <ByLayer>
DIMLTYPE <ByLayer>
DIMLUNIT <2>
DIMLWD <-2>
DIMLWE <-2>
DIMMZF <100.0000>
DIMMZS <>
DIMPOST <>
DIMRND <0.0000>
DIMSAH <0>
DIMSCALE <1.0000>
DIMSD1 <0>
DIMSD2 <0>
DIMSE1 <0>
DIMSE2 <0>
DIMSHO <1>
DIMSOXD <0>
DIMSTYLE <Standard>
DIMTAD <0>
DIMTDEC <4>
DIMTFAC <1.0000>
DIMTFILL <0>
DIMTFILLCLR <BYBLOCK>
DIMTIH <0>
DIMTIX <0>
DIMTM <0.0000>
DIMTMOVE <0>
DIMTOFL <0>
DIMTOH <1>
DIMTOL <0>
DIMTOLJ <1>
DIMTP <0.0000>
DIMTSZ <0.0000>
DIMTVP <0.0000>
DIMTXSTY <Standard>
DIMTXT <2.5000>
DIMTXTDIRECTION <0>
DIMTZIN <0>
DIMUNIT <2>
DIMUPT <0>
DIMZIN <0>
DISPSILH <0>
DRAGMODE <2>
DRAGVS <>
DRAWORDERCTL <3>
DWFFRAME <2>
DWFOSNAP <1>
DWGCODEPAGE <ANSI_1251> (Read Only)
DWGNAME <> (Read Only)
DWGPREFIX <C:\Users\Dell\AppData\Roaming\Nanosoft\nanoCAD Int 5.0\Templates\> (Read Only)
DWGTITLED <0> (Read Only)
DXEVAL <12>
DXFTEXTADJUSTALIGNMENT <0>
ELEVATION <0.0000>
EXPORTMODELSPACE <0>
EXPORTPAGESETUP <0>
EXPORTPAPERSPACE <0>
EXTMAX <-1.0000E+20,-1.0000E+20,-1.0000E+20> (Read Only)
EXTMIN <1.0000E+20,1.0000E+20,1.0000E+20> (Read Only)
EXTNAMES <1>
FACETRES <0.5000>
FIELDDISPLAY <1>
FIELDEVAL <31>
FILEDIA <1>
FILLETRAD <0.0000>
FILLMODE <1>
FONTALT <txt.shx>
FRAME <3>
FRONTZ <0.0000> (Read Only)
GEOLATLONGFORMAT <1>
GEOMARKERVISIBILITY <1>
GRIDDISPLAY <7>
GRIDMAJOR <5>
GRIDMODE <0>
GRIDUNIT <10.0000,10.0000>
GRIPBLOCK <0>
GRIPCOLOR <150>
GRIPDYNCOLOR <140>
GRIPHOT <1>
GRIPHOVER <161>
GRIPOBJLIMIT <100>
GRIPS <1>
GRIPSIZE <10>
GRIPTIPS <1>
HALOGAP <0>
HIDETEXT <1>
HIGHLIGHT <1>
HPANG <0.0000>
HPASSOC <1>
HPBOUND <1>
HPCOLOR <Use current>
HPDOUBLE <0>
HPDRAWORDER <3>
HPGAPTOL <0.0000>
HPINHERIT <0>
HPISLANDS <1>
HPNAME <ANSI31>
HPORIGIN <0.0000,0.0000>
HPSCALE <1.0000>
HPSEPARATE <0>
HPSPACE <1.0000>
HYPERLINKBASE <>
IMAGEFRAME <1>
INDEXCTL <0>
INSBASE <0.0000,0.0000,0.0000>
INSNAME <>
INSUNITS <4>
INTERFERECOLOR <1>
INTERFEREOBJVS <>
INTERFEREVPVS <>
INTERSECTIONCOLOR <257>
INTERSECTIONDISPLAY <0>
ISOLINES <4>
LASTPOINT <0.0000,0.0000,0.0000>
LASTPROMPT <>
LATITUDE <5>
LAYEREVAL <0>
LAYERNOTIFY <0>
LENSLENGTH <50.0000> (Read Only)
LIGHTGLYPHDISPLAY <1>
LIGHTINGUNITS <2>
LIGHTSINBLOCKS <1>
LIMCHECK <0>
LIMMAX <420.0000,297.0000>
LIMMIN <0.0000,0.0000>
LOCALROOTPREFIX <>
LOFTANG1 <90>
LOFTANG2 <90>
LOFTMAG1 <0.0000>
LOFTMAG2 <0.0000>
LOFTNORMALS <1>
LOFTPARAM <7>
LOGFILEMODE <0>
LOGINNAME <>
LONGITUDE <187>
LTSCALE <1.0000>
LUNITS <2>
LUPREC <4>
LWDEFAULT <25>
LWDISPLAY <1>
LWDISPSCALE <0.5500>
LWUNITS <1>
MAXACTVP <64>
MAXHATCHDENSITY <1000000>
MAXSORT <1000>
MEASUREMENT <1>
MESHTYPE <1>
MIRRTEXT <0>
MODEMACRO <>
MSLTSCALE <1>
MSOLESCALE <1.0000>
MTMODE <0>
NOMUTT <0>
NORTHDIRECTION <0>
OBSCUREDCOLOR <257>
OBSCUREDLTYPE <0>
OLEFRAME <2>
OLESTARTUP <0>
OPENPARTIAL <1>
ORTHOMODE <0>
OSMODE <4133>
OSNAPCOORD <2>
PDFFRAME <1>
PDFOSNAP <1>
PDMODE <0>
PDSIZE <0.0000>
PELLIPSE <0>
PERSPECTIVE <0>
PICKADD <1>
PICKBOX <4>
PICKFIRST <1>
PICKSTYLE <1>
PLATFORM <> (Read Only)
PLINECACHE <0>
PLINEGEN <0>
PLINETYPE <2>
PLINEWID <0.0000>
POLARADDANG <>
POLARANG <0.0000>
POLARMODE <0>
PREVIEWTYPE <0>
PREVIEW_HEIGHT <85>
PREVIEW_WIDTH <180>
PROJECTNAME <>
PROXYGRAPHICS <1>
PROXYSHOW <1>
PSLTSCALE <0>
PSOLHEIGHT <80.0000>
PSOLWIDTH <5.0000>
PSTYLEMODE <1> (Read Only)
PSVPSCALE <0.0000>
PUBLISHHATCH <1>
PUCSBASE <>
QTEXTMODE <0>
R12SAVEACCURACY <8>
R12SAVEDEVIATION <0.0000>
REALWORLDSCALE <1>
RECOMPUTEDIMBLOCKSREQUIRED <1>
REFRESHPROPERTIES <0>
REGENMODE <1>
REQUIREDVERSIONS <0> (Read Only)
RSNAP <1>
SAVEDWGCHECKSUM <1>
SAVEFIDELITY <1>
SAVEROUNDTRIP <1>
SDI <0>
SELECTIONCYCLING <2>
SELECTIONPREVIEW <3>
SELECTIONPREVIEWMAXOBJECTS <100>
SHADEDGE <3>
SHADEDIF <70>
SHADOWPLANELOCATION <0.0000>
SHOWHIST <1>
SKETCHINC <1.0000>
SKPOLY <0>
SKYSTATUS <0>
SNAPANG <0>
SNAPBASE <0.0000,0.0000>
SNAPISOPAIR <0>
SNAPMODE <0>
SNAPSTYL <0>
SNAPUNIT <10.0000,10.0000>
SOLIDHIST <1>
SORTENTS <127>
SPLFRAME <0>
SPLINESEGS <8>
SPLINETYPE <6>
STEPSIZE <6.0000>
STEPSPERSEC <2.0000>
SURFTAB1 <6>
SURFTAB2 <6>
SURFTYPE <6>
SURFU <6>
SURFV <6>
SYSCODEPAGE <ANSI_1252> (Read Only)
TARGET <210.0000,148.5000,0.0000> (Read Only)
TDCREATE <2454082.9501> (Read Only)
TDINDWG <0.0106> (Read Only)
TDUCREATE <2454082.9084> (Read Only)
TDUPDATE <2455848.6317> (Read Only)
TDUSRTIMER <0.0106> (Read Only)
TDUUPDATE <2455848.5901> (Read Only)
TEMPPREFIX <> (Read Only)
TEXTFILL <1>
TEXTQLTY <50>
TEXTSIZE <2.5000>
TEXTSTYLE <Standard>
THICKNESS <0.0000>
THUMBSIZE <3>
TILEMODE <1>
TILEMODELIGHTSYNCH <1>
TIMEZONE <-8000>
TRACEWID <1.0000>
TREEDEPTH <3020>
TSTACKALIGN <1>
TSTACKSIZE <70>
UCSBASE <>
UCSFOLLOW <0>
UCSICON <3>
UCSNAME <> (Read Only)
UCSORG <0.0000,0.0000,0.0000> (Read Only)
UCSVIEW <1>
UCSVP <1>
UCSXDIR <1.0000,0.0000,0.0000> (Read Only)
UCSYDIR <0.0000,1.0000,0.0000> (Read Only)
UNDOCTL <53>
UNDOMARKS <0> (Read Only)
UNITMODE <0>
UPDATETHUMBNAIL <15>
USERI1 <0>
USERI2 <0>
USERI3 <0>
USERI4 <0>
USERI5 <0>
USERR1 <0.0000>
USERR2 <0.0000>
USERR3 <0.0000>
USERR4 <0.0000>
USERR5 <0.0000>
USERS1 <>
USERS2 <>
USERS3 <>
USERS4 <>
USERS5 <>
VIEWCTR <210.0000,148.5000,0.0000> (Read Only)
VIEWDIR <0.0000,0.0000,1.0000> (Read Only)
VIEWINVARIANCEPOINT <0>
VIEWMODE <16> (Read Only)
VIEWSIZE <352.0976> (Read Only)
VIEWTWIST <0> (Read Only)
VISRETAIN <1>
WORLDUCS <1> (Read Only)
WORLDVIEW <1>
XCLIPFRAME <0>
XEDIT <1>
XFADECTL <50>
AutoSaving: C:\Users\Dell\AppData\Local\Temp\Untitled0(08-34-32_02-01-2021).autosave

Quote

nanoCAD forum