4 replies to this topic

[simone1968]

Hello,
I installed Nano cad 5.0 on the Windows 7 64 bit. When I'm starting it the message appears - "Error: Some of application components are missing or corrupted. Reinstall aplication to fix this problem". I reinstall it and it doesn't works. What do you suggest. I would be grateful for help.

[Hellen_V]

Hello Simone,
try to uninstall nanoCAD, then download ftp://ftp.nanocad.co...NCE50(2006).zip , extract it to empty folder and start setup.exe

[simone1968]

Hello,
I tried to follow your instructions, but the error remains.

[Ivan Dal Corso]

Hi, I also found the same problem as simone1968

I installed nanocad (the free version) in two PCs, in a Sony vaio (x86) which is now 7/8 years old and it works very well but due to its limited hardware I wanted to install nanocad on a PC where I used autocad, an HP 15af005nl (x64) that has a higher performance processor and an 8Gb ram, despite this the program doesn't want to work, I even formatted the PC to see if I could make it work but nothing ..

At the first start the loading window opens and you jug indicating the error corrupt or missing file ... from the second attempt onwards the loading window does not even open .. what can I do to solve the problem?

Thanks

[andreash]

Hello,

I have the same problem with Windows 8.1 64bit.

Quote

I installed Nano cad 5.0 on the Windows 7 64 bit. When I'm starting it the message appears - "Error: Some of application components are missing or corrupted. Reinstall aplication to fix this problem". I reinstall it and it doesn't works. What do you suggest. I would be grateful for help.

Quote

At the first start the loading window opens and you jug indicating the error corrupt or missing file ... from the second attempt onwards the loading window does not even open .. what can I do to solve the problem?

Thanks