Technical Support Portal
SevaM 11 Feb 2013
We had started Technical Support Portal support.nanocad.com. It process all request from support@nanocad.com and web-requests.
Link for FAQ section
http://support.nanoc...olutionsHome.sd
Also you can ask questions using web-form and register on portal to have access to your questins. If ypu have problems with registration - contact to support@nanocad.com or send me a message.
If you ask technical question,please, write information about your system like Windows version, language, service packs, etc.
Link for FAQ section
http://support.nanoc...olutionsHome.sd
Also you can ask questions using web-form and register on portal to have access to your questins. If ypu have problems with registration - contact to support@nanocad.com or send me a message.
If you ask technical question,please, write information about your system like Windows version, language, service packs, etc.
ezbz 14 Aug 2013
I cannot post new questions to this forum. I have no batch plot command available. Please help.
SevaM 09 Oct 2013
Batch Plot function will be available in nanoCAD 5/0 Plus coming soon
Hellen_V 03 Sep 2014
Hello Ferenc,
use TRIM command: first select object(s) which will be used as the cutting object, click Enter, then select the ellipse.
You can explode multi-line text into single-line. Select the text and use EXPLODE command.
nanoCAD can't explode text into primitives: lines, circles, etc.
use TRIM command: first select object(s) which will be used as the cutting object, click Enter, then select the ellipse.
You can explode multi-line text into single-line. Select the text and use EXPLODE command.
nanoCAD can't explode text into primitives: lines, circles, etc.
angelo 05 Nov 2014
Dear Hellen_Ch
My nanocad free version 5.0 doesn't work on win xp pc. The program shuts down at start up immediately when I try to open any dwg file. Can you help me to solve this problem. I am blocked!!!
Thanks.
My nanocad free version 5.0 doesn't work on win xp pc. The program shuts down at start up immediately when I try to open any dwg file. Can you help me to solve this problem. I am blocked!!!
Thanks.
sorsrr 08 Nov 2017
I have a .dwg site plan that has dimensions on it. Looks fine on screen, but when printed, the dimensions are missing. HELP!
Hellen_V 21 Nov 2017
adipose 20 Sep 2018
vla-getpapersize does not seem to work. Using NanoCAD Plus 10.
Used example routine from here: https://knowledge.au...CA3676-htm.html
Results below:
EXAMPLE_GETPAPERSIZE - EXAMPLE_GETPAPERSIZE
error: ActiveX Server returned an error: Type mismatch.
Why is there a type mismatch? The same routine is working fine in AutoCAD.
Used example routine from here: https://knowledge.au...CA3676-htm.html
(defun c:Example_GetPaperSize() ;; This example gets the width and height of the default ;; paper size for your system. (setq acadObj (vlax-get-acad-object)) (setq doc (vla-get-ActiveDocument acadObj)) (vla-GetPaperSize (vla-get-ActiveLayout doc) 'PaperWidth 'PaperHeight) (alert (strcat "The default paper size is " "\nWidth: " (rtos PaperWidth 2) "\nHeight: " (rtos PaperHeight 2))) )
Results below:
EXAMPLE_GETPAPERSIZE - EXAMPLE_GETPAPERSIZE
error: ActiveX Server returned an error: Type mismatch.
Why is there a type mismatch? The same routine is working fine in AutoCAD.
Tanjaddaniel 29 Jul 2019
From where I can get the support help for a Router Customer Service Number ?
allen bartlo 06 Feb 2020
Hello, new to nanocad 2020.
Trying to use ordinate dimensions. Works fine in X axis but I cannot figure out how to make ordinate dimensions in Y axis.
Sample drawing attached.
Not sure if this is the proper place to post, but thanks in advance for help.
Al
Trying to use ordinate dimensions. Works fine in X axis but I cannot figure out how to make ordinate dimensions in Y axis.
Sample drawing attached.
Not sure if this is the proper place to post, but thanks in advance for help.
Al
Attached Files
-
forum sample Model.pdf (9.35K)
downloads: 108
Pamela 14 Jun 2020
Good evening!
I downloaded the program and received a serial number, so that at the time of activating the error, it does not activate at all, I really need your help, I've done all the step by step and nothing.
Please help me!
I downloaded the program and received a serial number, so that at the time of activating the error, it does not activate at all, I really need your help, I've done all the step by step and nothing.
Please help me!
wandraaa 15 Jun 2020
Good morning!
I am also having similar issue.
I've downloaded the program and received a serial number. I followed the instruction but I failed to get the license every time i tried.
Please help me!
I am also having similar issue.
I've downloaded the program and received a serial number. I followed the instruction but I failed to get the license every time i tried.
Please help me!
Hellen_V 15 Jun 2020
Pamela, on 14 June 2020 - 08:37 PM, said:
Good evening!
I downloaded the program and received a serial number, so that at the time of activating the error, it does not activate at all, I really need your help, I've done all the step by step and nothing.
Please help me!
I downloaded the program and received a serial number, so that at the time of activating the error, it does not activate at all, I really need your help, I've done all the step by step and nothing.
Please help me!
wandraaa, on 15 June 2020 - 02:12 AM, said:
Good morning!
I am also having similar issue.
I've downloaded the program and received a serial number. I followed the instruction but I failed to get the license every time i tried.
Please help me!
I am also having similar issue.
I've downloaded the program and received a serial number. I followed the instruction but I failed to get the license every time i tried.
Please help me!
Andreas UB 19 Jan 2021
Hello,
Just installed NanoCad Pro so I am new to this program.
How do I Export to .iges.
When I try the CommandLine says "No solid, surfaces or meshs selected."
/Andreas
Just installed NanoCad Pro so I am new to this program.
How do I Export to .iges.
When I try the CommandLine says "No solid, surfaces or meshs selected."
/Andreas
Karsten 21 Jan 2021
Hi nanoCAD Team,
i'm using nanoCAD 5 Free for just a couple of days in homeoffice.
Is it possible (like in AutoCAD at my office) to have open the Layer Manager Dialog AND work at my drawing?
I often work with the group-function and i have to open the manager - make my choice - close the manager - draw something - open the manager - and so on...
Is there a solution for this "problem"?
Greetings from Germany
Karsten
i'm using nanoCAD 5 Free for just a couple of days in homeoffice.
Is it possible (like in AutoCAD at my office) to have open the Layer Manager Dialog AND work at my drawing?
I often work with the group-function and i have to open the manager - make my choice - close the manager - draw something - open the manager - and so on...
Is there a solution for this "problem"?
Greetings from Germany
Karsten
pguimber 21 Jan 2021
Hello,
i think no...
But i don't know all !
Greetings from France
i think no...
But i don't know all !
Greetings from France
Karsten 21 Jan 2021
Hi,
it's me again
Next "problem" i'd like to solve:
after making a hatch, i'm able to edit the hatch by this blue handles/ankerpoints.
In AutoCAD i can change the middle ankerpoint from a straight to a curve. There i have to hover over the blue handle, get a menu and choose -convert to curve- (i hope someone understands me).
Is this possible in nanoCAD5 to?
Karsten
it's me again
Next "problem" i'd like to solve:
after making a hatch, i'm able to edit the hatch by this blue handles/ankerpoints.
In AutoCAD i can change the middle ankerpoint from a straight to a curve. There i have to hover over the blue handle, get a menu and choose -convert to curve- (i hope someone understands me).
Is this possible in nanoCAD5 to?
Karsten