nanoCAD Plus 10.0 Beta version!!
#1
Posted 08 June 2018 - 02:47 PM
Visit http://nanocad.com/page/Betatester to be the first to see new nanoCAD!
#2
Posted 21 June 2018 - 11:11 AM
#3
Posted 28 June 2018 - 09:59 AM
I need to add Midpoint in the Object snap. Because I can't find the Drafting Settings in the ribbon menu I used DSETTINGS command.
(Where is the Drafting Settings in the ribbon ? )
After this the OSNAP find midpoint only in some objects. I've got sevral lines but only for a few of these the midpoint selctor is showed, for others the selector choice endpoint.
- Pierluigi
#4
Posted 28 June 2018 - 10:04 AM
#5
Posted 28 June 2018 - 10:30 AM
1. there is not dsettings button on the Ribbon, call it through the command line or use right click on the OSNAP button.
2. snap has bigger priority than osnap. Autocad works the same.
support@nanocad.com
#6
Posted 28 June 2018 - 10:32 AM
shortcut using right-click on the OSNAP is verygood.... (I missed it in the previous Nanocad version if exist).
#7
Posted 28 June 2018 - 10:35 AM
support@nanocad.com
#8
Posted 28 June 2018 - 10:43 AM
The tag cannot be null or contain spaces.
I sent an amail to support with dwg.
- Pierluigi
#9
Posted 28 June 2018 - 10:49 AM
Pierluigi Bucolo, on 28 June 2018 - 10:43 AM, said:
The tag cannot be null or contain spaces.
support@nanocad.com
#10
Posted 25 July 2018 - 07:48 PM
Before close, NC 10 ask to me to save the work.
Reopening NC and loading the saved file all changes seem present.
There is a log file suitable to understand why NC was crashed ?
- Pierluigi
#11
Posted 26 July 2018 - 06:49 AM
try to remember what commands you executed before crash. Maybe you worked with specific file?
Try to find blackbox.log in Windows Temp folder.
support@nanocad.com
#12
Posted 26 July 2018 - 07:06 AM
I don't remember which command I executed before crash (sorry), but in the follow you can find the blackbox.log content.
I hope could be help you.
- Pierluigi
------- blackbox.log -----
---------------------------Black box record------------------------
Recording time 25/7/2018
Installed Program:
Name - nanoCAD x64 Plus Int
Version - 10
Build - 1
-----------Operating system basic characteristics:-----------
MajorVersion - 0x6
MinorVersion - 0x2
BuildNumber - 0x23F0
operating system platform - 0x2
Service Pack Information -
-----------Initial Memory Usage:-----------
In use: 49 percent
Physical total: 8064652 KB
Physical free: 4053816 KB
Paging total: 10817164 KB
Paging free: 6242624 KB
Virtual total: -128 KB
Virtual Free: -4524628 KB
Process information:
GUI objects: 44
USER objects: 8
Virtual used: 61500 KB
Virtual peak: 61500 KB
Page file usage: 45496 KB
Hard disk information:
Drive C: Total : 249478140 KB, Free : 166239372 KB
Drive D: Total : 1953382396 KB, Free : 284982376 KB
Drive G: Total : 1952693244 KB, Free : 3275464 KB
-----------Display information-----------
Driver String - CDD
Spec Version - 1025
Version - 1025
Screen X - 1920
Screen Y - 1080
BPP - 32
Planes - 1
RasterCaps - 0x7E99
-----------Memory Usage when exception occured:-----------
In use: 62 percent
Physical total: 8064652 KB
Physical free: 3024872 KB
Paging total: 10817164 KB
Paging free: 2900648 KB
Virtual total: -128 KB
Virtual Free: -6787528 KB
Process information:
GUI objects: 1168
USER objects: 487
Virtual used: 1358088 KB
Virtual peak: 1358088 KB
Page file usage: 770712 KB
Hard disk information:
Drive C: Total : 249478140 KB, Free : 166635832 KB
Drive D: Total : 1953382396 KB, Free : 284981976 KB
Drive G: Total : 1952693244 KB, Free : 3275464 KB
-----------specific program information-----------
Started Command - fillet
Started Command - Line
Started Command - Line
Started Command - Line
Started Command - vcTrimByEdgeCmd
Started Command - Delete
Started Command - fillet
Started Command - fillet
Started Command - Line
Started Command - Move
Last entry---> Started Command - fillet
Started Command - Delete
Started Command - Move
Started Command - Move
Started Command - grip_stretch
Started Command - ToggleOrto
Started Command - grip_stretch
Started Command - Line
Started Command - Move
Started Command - Delete
Started Command - CopyClip
Started Command - Paste
Started Command - ddedit
Started Command - grip_stretch
Started Command - SaveDocument
Started Command - vcOffsetCmd
Started Command - Line
Started Command - Line
Started Command - Line
Started Command - Line
Started Command - Line
Started Command - fillet
----------- crash information -----------
Windows Error Code:(0x00000000) Operazione completata.
Exception code: 0xC0000005
--- Processor registers ---
Eip: 0x5EB5A774
Crash Code dump - 32 bytes of code program
FF 50 08 48 C7 45 50 00 00 00 00 FF 0F 48 85 DB 74 09 48 8B 13 48 8B CB FF 52 28 41 8B C4 48 83
Eax: 0x00460037
Ebx: 0x9F2B03E0 ---> 0x69F4AAE8
Ecx: 0xFC2AAA10 ---> 0x00460037
Edx: 0x0000FFFF
Edi: 0x9FB3DBF0 ---> 0x00000001
Esi: 0xB1BBC5A0 ---> 0xAEA46C20
Esp: 0x0AAFBC10 ---> 0x9F2B03E0
Ebp: 0x0AAFBC70 ---> 0x00000000
----------- Calls stack-------------
--->Eip:0x5EB5A774 Base:0x5E8B0000 Delta:0x002AA774 Module C:\Program Files\Nanosoft\nanoCAD x64 Plus it 10.0\bin\odpropmanager.dll
Alternate stack walking...
Loaded modules...
Base:0x10000000 Module C:\Program Files\Nanosoft\nanoCAD x64 Plus it 10.0\bin\mcdata.dll
Base:0x52C70000 Module C:\WINDOWS\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.9415_none_08e0c10ba840a28a\MSVCP90.dll
Base:0x53890000 Module C:\WINDOWS\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.9415_none_08e0c10ba840a28a\MSVCR90.dll
Base:0x52960000 Module C:\Program Files\Symantec.cloud\EndpointProtectionAgent\Engine\22.9.3.13\buShell.dll
Base:0x53700000 Module C:\Program Files\Symantec.cloud\EndpointProtectionAgent\Engine\22.9.3.13\ccVrTrst.dll
Base:0x53940000 Module C:\Program Files\Symantec.cloud\EndpointProtectionAgent\Engine\22.9.3.13\ccLib.dll
Base:0x53550000 Module C:\Program Files\Symantec.cloud\EndpointProtectionAgent\Engine\22.9.3.13\ccSet.dll
Base:0x53660000 Module C:\Program Files\Symantec.cloud\EndpointProtectionAgent\Engine\22.9.3.13\ccIPC.dll
#13
Posted 26 July 2018 - 07:08 AM
sometimes (too often) when I select multiple object, I can't change the layer, using the drop-down list in the ribbon table (Home)
The drop-down list is unselectable.
I need to select less objects or reselect the same object again to unlock the drop-down list
- Pierluigi
#14
Posted 26 July 2018 - 07:09 AM
Attach it here or send to support@nanocad.com
Edited by Hellen_V, 26 July 2018 - 07:10 AM.
support@nanocad.com
#15
Posted 26 July 2018 - 07:11 AM
Pierluigi Bucolo, on 26 July 2018 - 07:08 AM, said:
sometimes (too often) when I select multiple object, I can't change the layer, using the drop-down list in the ribbon table (Home)
The drop-down list is unselectable.
I need to select less objects or reselect the same object again to unlock the drop-down list
- Pierluigi
yes, this bug was fixed.
support@nanocad.com
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users