XY coordinates export
Igor200019 08 Sep 2019
Hi there!
I spent several days to find the solution so probably somebody here can help because I installed NanoCad as well...
My task is to get the XY coordinates from DXF or DWG drawing with the correct following of lines. Mainly I need to import it to the machine as tool library.
It should be something like
514.997411,704.507486
514.997411,605.507486
506.417411,605.007486
506.297129,604.988973
Before I used DraftSight so my story is that I didn't find any info how to extract coordinates from Draftsight. To import throught the drawing - not the problem, but to get... I found the separate program DX2XYZ which deals with only 2000 version files.
With this converting finally I have the coordinates with the all connection points mixed (check the attachment - left the real drawing, right is after the converting).
So I'm looking about NanoCad possibility just to get XY points with normal connection one by one. Is something possible? If not what do you recommend?
It's really strange - XY coordinates should be used widely but there is very poor information about the export and possibilities for every CAD program. Really simple problem but gettting me mad...
I spent several days to find the solution so probably somebody here can help because I installed NanoCad as well...
My task is to get the XY coordinates from DXF or DWG drawing with the correct following of lines. Mainly I need to import it to the machine as tool library.
It should be something like
514.997411,704.507486
514.997411,605.507486
506.417411,605.007486
506.297129,604.988973
Before I used DraftSight so my story is that I didn't find any info how to extract coordinates from Draftsight. To import throught the drawing - not the problem, but to get... I found the separate program DX2XYZ which deals with only 2000 version files.
With this converting finally I have the coordinates with the all connection points mixed (check the attachment - left the real drawing, right is after the converting).
So I'm looking about NanoCad possibility just to get XY points with normal connection one by one. Is something possible? If not what do you recommend?
It's really strange - XY coordinates should be used widely but there is very poor information about the export and possibilities for every CAD program. Really simple problem but gettting me mad...
Nefryt 15 May 2020
Hello!
You handled this problem because I need to insert points on the project and then export points and X, Y coordinates but I don't know how supposedly it is possible in NanoCad 2020?
You handled this problem because I need to insert points on the project and then export points and X, Y coordinates but I don't know how supposedly it is possible in NanoCad 2020?
karmi 19 May 2020
Igor200019, on 08 September 2019 - 07:37 PM, said:
Hi there!
I spent several days to find the solution so probably somebody here can help because I installed NanoCad as well...
My task is to get the XY coordinates from DXF or DWG drawing with the correct following of lines. Mainly I need to import it to the machine as tool library.
It should be something like
514.997411,704.507486
514.997411,605.507486
506.417411,605.007486
506.297129,604.988973
Before I used DraftSight so my story is that I didn't find any info how to extract coordinates from Draftsight. To import throught the drawing - not the problem, but to get... I found the separate program DX2XYZ which deals with only 2000 version files.
With this converting finally I have the coordinates with the all connection points mixed (check the attachment - left the real drawing, right is after the converting).
So I'm looking about NanoCad possibility just to get XY points with normal connection one by one. Is something possible? If not what do you recommend?
It's really strange - XY coordinates should be used widely but there is very poor information about the export and possibilities for every CAD program. Really simple problem but gettting me mad...
I spent several days to find the solution so probably somebody here can help because I installed NanoCad as well...
My task is to get the XY coordinates from DXF or DWG drawing with the correct following of lines. Mainly I need to import it to the machine as tool library.
It should be something like
514.997411,704.507486
514.997411,605.507486
506.417411,605.007486
506.297129,604.988973
Before I used DraftSight so my story is that I didn't find any info how to extract coordinates from Draftsight. To import throught the drawing - not the problem, but to get... I found the separate program DX2XYZ which deals with only 2000 version files.
With this converting finally I have the coordinates with the all connection points mixed (check the attachment - left the real drawing, right is after the converting).
So I'm looking about NanoCad possibility just to get XY points with normal connection one by one. Is something possible? If not what do you recommend?
It's really strange - XY coordinates should be used widely but there is very poor information about the export and possibilities for every CAD program. Really simple problem but gettting me mad...
Prova a dare un'occhiata a questi lisp, in particolare il n. 5 e 10 http://www.sepram.it/lisp.html
Non so se esportano in modo ordinato come cerchi tu ma potrebbero essere utili lo stesso...
Ciao
pguimber 19 May 2020
Hello,
load file Ptexport.lsp with appload command.
It's a file TXT with LSP extension.
Command : ptexport
click on point 1, 2, .... finish with Enter.
Export in text with csv or txt extension
You can see this (x, y, z):
15.2237065 111.775004 0 (it's the point 1)
102.947381 142.10658 0 ( the point 2....
191.265792 128.130265 0
Best regards
Patrick
load file Ptexport.lsp with appload command.
It's a file TXT with LSP extension.
Spoiler
Command : ptexport
click on point 1, 2, .... finish with Enter.
Export in text with csv or txt extension
You can see this (x, y, z):
15.2237065 111.775004 0 (it's the point 1)
102.947381 142.10658 0 ( the point 2....
191.265792 128.130265 0
Best regards
Patrick
Thanh Duong 15 Jun 2022
pguimber, on 19 May 2020 - 02:30 PM, said:
Hello,
load file Ptexport.lsp with appload command.
It's a file TXT with LSP extension.
Command : ptexport
click on point 1, 2, .... finish with Enter.
Export in text with csv or txt extension
You can see this (x, y, z):
15.2237065 111.775004 0 (it's the point 1)
102.947381 142.10658 0 ( the point 2....
191.265792 128.130265 0
Best regards
Patrick
load file Ptexport.lsp with appload command.
It's a file TXT with LSP extension.
Spoiler
Command : ptexport
click on point 1, 2, .... finish with Enter.
Export in text with csv or txt extension
You can see this (x, y, z):
15.2237065 111.775004 0 (it's the point 1)
102.947381 142.10658 0 ( the point 2....
191.265792 128.130265 0
Best regards
Patrick
Sorry, but no work. After appload, I received "Invalid Keyword or Command" for input "PTexport"
pguimber 15 Jun 2022
pguimber 15 Jun 2022
I have a message :
error: extra cdrs in dotted pair on input
But where ? i don't know!
Precision: I cleaned the file of its header to keep only the code
error: extra cdrs in dotted pair on input
But where ? i don't know!
Precision: I cleaned the file of its header to keep only the code
pguimber 15 Jun 2022
Maybe a begining answer :
https://forums.autod...3362627#M302769
https://forums.autod...3362627#M302769
Thanh Duong 16 Jun 2022
Thank you for your feedback.
Yesterday, I copied the said script and load into Nanocad but it doesnt works.
I found another way to do it (list the coordinates of some points).
Have a great day.
Yesterday, I copied the said script and load into Nanocad but it doesnt works.
I found another way to do it (list the coordinates of some points).
Have a great day.