After some confusion I understand the concept now but it would seem I am limited to the scales set within the menu?
Problem with this is I am trying to use 1:25 to fit my drawings onto one sheet but for dimensioning it is causing me limitations.
Seems I can work around this by dimensioning in VP model space and proceeding to using chspace command.
Is there no way to edit the measurement and symbol scale list like there is for the drawing scales list?
1
Measurement / Symbol Scales
Started by David_Parker, Jun 26 2022 06:54 AM
4 replies to this topic
#2
-
- Administrators
-
- 325 posts
Advanced Member
Posted 27 June 2022 - 08:06 PM
Hello.
Call command: PARAMS
In appeared window open: "Main options" -> "Design"
There you can input in "Drawing scale" (which is "Symbol scale actually) or in "Model scale" (which is "Measurement scale) required value "1:25". You can input is as it is.
Call command: PARAMS
In appeared window open: "Main options" -> "Design"
There you can input in "Drawing scale" (which is "Symbol scale actually) or in "Model scale" (which is "Measurement scale) required value "1:25". You can input is as it is.
#3
-
- Members
-
- 20 posts
Member
Posted 29 June 2022 - 12:55 AM
That did the trick as well thank you. Much easier than my work around!
#4
-
- Members
-
- 20 posts
Member
Posted 29 June 2022 - 01:00 AM
David_Parker, on 29 June 2022 - 12:55 AM, said:
That did the trick as well thank you. Much easier than my work around!
But would be even better to be able to edit the measurement and symbol scale list directly from the tab at the bottom of the window.
#5
-
- Administrators
-
- 325 posts
Advanced Member
Posted 29 June 2022 - 07:43 PM
Send this suggestion to developers.
Thanks.
Thanks.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
